Technology

Art

Maker builds Gifford-McMahon cryocooler using 3D-printed parts and Arduino

news-aggregator

19d ago· 3 min readenNews

technology science 3d printing diy hardware

Summary

The article describes how a maker known as Hyperspace Pirate built a Gifford-McMahon cryocooler — a device that produces extremely cold air — using 3D-printed parts and an Arduino. It explains the basic thermodynamics behind cryocoolers: compression heats air, expansion cools it, and repeating this cycle can achieve very low temperatures. The project demonstrates that complex thermodynamic devices can be built with accessible tools like 3D printing and microcontrollers.

Source

bskyMaker builds Gifford-McMahon cryocooler using 3D-printed parts and Arduinoipv6.net

Key quotes

· 4 pulled

If you want some very cold air, you're going to have to dive deep into thermodynamic wizardry to find a practical way to get it.

Hyperspace Pirate did that digging and discovered the Gifford-McMahon cryocooler design.

That is just simple enough that Hyperspace Pirate was able to build his own cryocooler using 3D-printed parts and an Arduino.

Compression increases temperature, while expansion lowers temperature.

Snippet from the RSS feed

If you want some very cold air, you’re going to have to dive deep into thermodynamic wizardry to find a practical way to get it. Hyperspace Pirate did that digging and discovered the Gifford-McMahon cryocooler design. That is just simple enough that Hyper

You might also wanna read

Virginia Tech Researchers Develop 3D-Printed Cooling System with Ancient Techniques

Researchers at Virginia Tech have developed a 3D-printed, evaporative cooling system using hollow clay columns filled with sand and water to

Dezeen·1y ago

Johns Hopkins Researchers Develop Thermoelectric Cooling Technology with Double Efficiency

Researchers at Johns Hopkins Applied Physics Laboratory have developed a new solid-state thermoelectric refrigeration technology using nano-

sciencedaily.com·9mo ago

Apple iPhone 17 Pro Features Vapor Chamber Cooling Technology

Apple's iPhone 17 Pro and Pro Max feature vapor chamber cooling technology, which uses hermetically sealed chambers containing water that cy

spectrum.ieee.org·9mo ago

How the Final Cartridge III Freezer Works

pagetable.com·1y ago

Making glass-to-metal seals for homemade vacuum tubes: A practical guide

A technical blog post detailing the process of making glass-to-metal seals for homemade vacuum tubes. The author explains that while glass t

maurycyz.com·20d ago

Startup unveils 3D-printed nuclear reactor module to power AI data centers —touted as ‘the world’s first subcritical, solid-state, factory-built thorium nuclear reactor’

Tom's Hardware·17h ago

Comments

No comments yet. Be the first.