Local Integration of Marstek Venus E Battery with Home Assistant for Solar Self-Consumption
By
Helmut10001
Front-window bakery material. Catches the eye, delivers the goods.
Summary
A detailed technical guide documenting the local-only integration of a Marstek Venus E 5kWh AC-coupled battery into an existing 30kWp PV system. The author shares their complete setup process including physical installation using a TV mount, RS485 wiring, Modbus TCP communication, and implementing a "Zero Export" regulation loop using Home Assistant automation. The project emphasizes cloud independence and full local control to improve self-consumption from an existing solar system.
Key quotes
· 4 pulledThe goal: Zero-cloud dependency, full local control via Modbus TCP, and a 'Zero Export' regulation loop using Home Assistant.
In 2020, I took the initiative to install a 30kWp PV system on my own. Over the last 4 years, I achieved a self-consumption rate of roughly 48-50%.
This post covers the physical installation using a standard TV mount, RS485 wiring, and the complete software logic.
Integrating a cheap (~1050€) 5kWh AC-coupled battery into an existing 30kWp PV system.
You might also wanna read
How to Modify a Doorking Apartment Intercom for Apple Home Automation
A detailed technical guide about modifying a Doorking 1834-080 apartment intercom system to integrate with Apple Home automation after the a
How Learning to Shoot a Rifle Led Me to Build a Custom Computer Vision Scoring System
A personal narrative about the author's journey from learning to shoot a rifle (to cook venison from scratch) to building a custom computer
Guide to Mobile Coding: How to Code Anywhere Using Your Smartphone
A guide explaining how to set up a smartphone for coding on-the-go using terminal access, enabling developers to code anywhere with an inter
ESPectre: Wi-Fi CSI-Based Motion Detection System with Home Assistant Integration
ESPectre is an open-source motion detection system that uses Wi-Fi Channel State Information (CSI) analysis to detect movement without camer
Custom Doorbell Application Development with Home Assistant
A brief post about creating a custom doorbell application using Home Assistant, with context mentioning software development, Rust programmi
Open-Source Firmware Solution for Reviving Bricked Nest Thermostats
The article presents a firmware solution called 'NoLongerEvil-Thermostat' that allows users to revive bricked Nest thermostats by replacing
